data modeling for metrology and testing in measurement science modeling and simulation in science engineering and technology

Download Book Data Modeling For Metrology And Testing In Measurement Science Modeling And Simulation In Science Engineering And Technology in PDF format. You can Read Online Data Modeling For Metrology And Testing In Measurement Science Modeling And Simulation In Science Engineering And Technology here in PDF, EPUB, Mobi or Docx formats.

Data Modeling For Metrology And Testing In Measurement Science

Author : Franco Pavese
ISBN : 9780817648046
Genre : Mathematics
File Size : 62. 47 MB
Format : PDF, ePub, Mobi
Download : 413
Read : 1112

Get This Book


This book provide a comprehensive set of modeling methods for data and uncertainty analysis, taking readers beyond mainstream methods and focusing on techniques with a broad range of real-world applications. The book will be useful as a textbook for graduate students, or as a training manual in the fields of calibration and testing. The work may also serve as a reference for metrologists, mathematicians, statisticians, software engineers, chemists, and other practitioners with a general interest in measurement science.

Metrology And Theory Of Measurement

Author : Valery A. Slaev
ISBN : 9783110284829
Genre : Science
File Size : 39. 73 MB
Format : PDF, ePub, Mobi
Download : 220
Read : 657

Get This Book


Metrology is the science of measurements. It is traceable to measurement standards, thus to the concept of measurement accuracy, which is used in all natural and technical sciences, as well as in some fields of social sciences and liberal arts. The key problem is one of obtaining knowledge of the physical reality, which is observed through a prism of an assemblage of quantity properties describing the objectively-real world. One of the fundamental tasks of metrology is the development of theoretical and methodological aspects of the procedure of getting an accurate knowledge relating to objects and processes of the surrounding world. Due to the rapid development of information technologies and intelligent measurement systems and measuring instruments, as well as to the growing usage of mathematical methods in social and biological sciences, this monograph is dedicated to convey the fundamental theory.

Optical Measurements Modeling And Metrology Volume 5

Author : Tom Proulx
ISBN : 9781461402282
Genre : Mathematics
File Size : 88. 26 MB
Format : PDF, Docs
Download : 640
Read : 212

Get This Book


Optical Measurements, Modeling, and Metrology represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials; MEMS and Nanotechnology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.

Advanced Mathematical And Computational Tools In Metrology And Testing X

Author : Franco Pavese
ISBN : 9789814678636
Genre : Mathematics
File Size : 40. 70 MB
Format : PDF, Mobi
Download : 645
Read : 977

Get This Book


This volume contains original and refereed contributions from the tenth AMCTM Conference (http://www.nviim.ru/AMCTM2014) held in St. Petersburg (Russia) in September 2014 on the theme of advanced mathematical and computational tools in metrology and testing. The themes in this volume reflect the importance of the mathematical, statistical and numerical tools and techniques in metrology and testing and, also keeping the challenge promoted by the Metre Convention, to access a mutual recognition for the measurement standards. Contents:Fostering Diversity of Thought in Measurement Science (F Pavese and P De Bièvre)Polynomial Calibration Functions Revisited: Numerical and Statistical Issues (M G Cox and P Harris)Empirical Functions with Pre-Assigned Correlation Behaviour (A B Forbes)Models and Methods of Dynamic Measurements: Results Presented by St. Petersburg Metrologists (V A Granovskii)Interval Computations and Interval-Related Statistical Techniques: Estimating Uncertainty of the Results of Data Processing and Indirect Measurements (V Ya Kreinovich)Classification, Modeling and Quantification of Human Errors in Chemical Analysis (I Kuselman)Application of Nonparametric Goodness-of-Fit Tests: Problems and Solution (B Yu Lemeshko)Dynamic Measurements Based on Automatic Control Theory Approach (A L Shestakov)Models for the Treatment of Apparently Inconsistent Data (R Willink)Model for Emotion Measurements in Acoustic Signals and Its Analysis (Y Baksheeva, K Sapozhnikova and R Taymanov)Uncertainty Calculation in Gravimetric Microflow Measurements (E Batista, N Almeida, I Godinho and E Filipe)Uncertainties Propagation from Published Experimental Data to Uncertainties of Model Parameters Adjusted by the Least Squares (V I Belousov, V V Ezhela, Y V Kuyanov, S B Lugovsky, K S Lugovsky and N P Tkachenko)A New Approach for the Mathematical Alignment Machine Tool-Paths on a Five-Axis Machine and Its Effect on Surface Roughness (S Boukebbab, J Chaves-Jacob, J-M Linares and N Azzam)Goodness-of-Fit Tests for One-Shot Device Testing Data (E V Chimitova and N Balakrishan)Calculation of Coverage Intervals: Some Study Cases (A Stepanov, A Chunovkina and N Burmistrova)Application of Numerical Methods in Metrology of Electromagnetic Quantities (M Cundeva-Blajer)Calibration Method of Measuring Instruments in Operating Conditions (A A Danilov, Yu V Kucherenko, M V Berzhinskaya, N P Ordinartseva)Statistical Methods for Conformity Assessment When Dealing with Computationally Expensive Systems: Application to a Fire Engineering Case Study (S Demeyer, N Fischer, F Didieux and M Binacchi)Overview of EMRP Joint Reserch Project NEW06 "Traceability for Computationally-Intensive Metrology" (A B Forbes, I M Smith, F Härtig and K Wendt)Stable Units of Account for Economic Value Correct Measuring (N Hovanov)A Novel Approach for Uncertainty Evaluation Using Characteristic Function Theory (A B Ionov, N S Chernysheva and B P Ionov)Estimation of Test Uncertainty for TraCIM Reference Pairs (F Keller, K Wendt and F Härtig)Approaches for Assigning Numerical Uncertainty to Reference Data Pairs for Software Validation (G J P Kok and I M Smith)Uncertainty Evaluation for a Computationally Expensive Model of a Sonic Nozzle (G J P Kok and N Pelevic)EllipseFit4HC: A MATLAB Algorithm for Demodulation and Uncertainty Evaluation of the Quadrature Interferometer Signals (R Köning, G Wimmer and V Witkovský)Considerations on the Influence of Test Equipment Instability and Calibration Methods on Measurement Uncertainty of the Test Laboratory (A S Krivov, S V Marinko and I G Boyko)A Cartesian Method to Improve the Results and Save Computation Time in Bayesian Signal Analysis (G A Kyriazis)The Definition of the Reliability of Identification of Complex Organic Compounds Using HPLC and Base Chromatographic and Spectral Data (E V Kulyabina and Yu A Kudeyarov)Uncertainty Evaluation of Fluid Dynamic Simulation with One-Dimensional Riser Model by Means of Stochastic Differential Equations (E A O Lima, S B Melo, C C Dantas, F A S Teles and S Soares Bandiera)Simulation Method to Estimate the Uncertainties of ISO Specifications (J-M Linares and J M Sprauel)Adding a Virtual Layer in a Sensor Network to Improve Measurement Reliability (U Maniscalco and R Rizzo)Calibration Analysis of a Computational Optical System Applied in the Dimensional Monitoring of a Suspension Bridge (L L Martins, J M Rebordão and A S Ribeiro)Determination of Numerical Uncertainty Associated with Numerical Artefacts for Validating Coordinate Metrology Software (H D Minh, I M Smith and A B Forbes)Least-Squares Method and Type B Evaluation of Standard Uncertainty (R Palenčár, S Ďuriš, P Pavlásek, M Dovica, S Slosarčík and G Wimmer)Optimising Measurement Processes Using Automated Planning (S Parkinson, A Crampton and A P Longstaff)Software Tool for Conversion of Historical Temperature Scales (P Pavlásek, S Ďuriš, R Palenčár and A Merlone)Few Measurements, Non-Normality: A Statement on the Expanded Uncertainty (J Petry, B De Boeck, M Dobre and A Peruzzi)Quantifying Uncertainty in Accelerometer Sensitivity Studies (A L Rukhin and D J Evans)Metrological Aspects of Stopping Iterative Procedures in Inverse Problems for Static-Mode Measurements (K K Semenov)Inverse Problems in Theory and Practice of Measurements and Metrology (K K Semenov, G N Solopchenko and V Ya Kreinovich)Fuzzy Intervals as Foundation of Metrological Support for Computations with Inaccurate Data (K K Semenov, G N Solopchenko and V Ya Kreinovich)Testing Statistical Hypotheses for Generalized Semiparametric Proportional Hazards Models with Cross-Effect of Survival Functions (M A Semenova and E V Chimitova)Novel Reference Value and DOE Determination by Model Selection and Posterior Predictive Checking (K Shirono, H Tanaka, M Shiro and K Ehara)Certification of Algorithms for Constructing Calibration Curves of Measuring Instruments (T Siraya)Discrete and Fuzzy Encoding of the ECG-Signal for Multidisease Diagnostic System (V Uspenskiy, K Vorontsov, V Tselykh and V Bunakov)Application of Two Robust Methods in Inter-Laboratory Comparisons with Small Samples (E T Volodarsky and Z L Warsza)Validation of CMM Evaluation Software Using TraCIM (K Wendt, M Franke and F Härtig)Semi-Parametric Polynomial Method for Retrospective Estimation of the Change-Point of Parameters of Non-Gaussian Sequences (S V Zabolotnii and Z L Warsza)Use of a Bayesian Approach to Improve Uncertainty of Model-Based Measurements by Hybrid Multi-Tool Metrology (N-F Zhang, B M Barnes, R M Silver and H Zhou)Application of Effective Number of Observations and Effective Degrees of Freedom for Analysis of Autocorrelated Observations (A Zieba) Readership: Researchers, graduate students, academics and professionals in metrology. Key Features:Unique consolidated series of books (started in 1993) in mathematics, statistics and software specifically for metrology and testingAuthors are among the most prominent in the metrology and testing fieldsNo competing books in the same comprehensive fieldKeywords:Mathematics;Statistics;Modeling;Uncertainty;Metrology;Testing;Computational Tools;Measurement Science

Standards Quality Control And Measurement Sciences In 3d Printing And Additive Manufacturing

Author : Chee Kai Chua
ISBN : 9780128134900
Genre : Technology & Engineering
File Size : 61. 21 MB
Format : PDF, ePub, Mobi
Download : 494
Read : 295

Get This Book


Standards, Quality Control and Measurement Sciences in 3D Printing and Additive Manufacturing addresses the critical elements of the standards and measurement sciences in 3D printing to help readers design and create safe, reliable products of high quality. With 3D printing revolutionizing the process of manufacturing in a wide range of products, the book takes key features into account, such as design and fabrication and the current state and future potentials and opportunities in the field. In addition, the book provides an in-depth analysis on the importance of standards and measurement sciences. With self-test exercises at the end of each chapter, readers can improve their ability to take up challenges and become proficient in a number of topics related to 3D printing, including software usage, materials specification and benchmarking. Helps the reader understand the quality framework tailored for 3D printing processes Explains data format and process control in 3D printing Provides an overview of different materials and characterization methods Covers benchmarking and metrology for 3D printing

Springer Handbook Of Metrology And Testing

Author : Horst Czichos
ISBN : 3642166415
Genre : Technology & Engineering
File Size : 85. 72 MB
Format : PDF, Kindle
Download : 976
Read : 771

Get This Book


This Springer Handbook of Metrology and Testing presents the principles of Metrology – the science of measurement – and the methods and techniques of Testing – determining the characteristics of a given product – as they apply to chemical and microstructural analysis, and to the measurement and testing of materials properties and performance, including modelling and simulation. The principal motivation for this Handbook stems from the increasing demands of technology for measurement results that can be used globally. Measurements within a local laboratory or manufacturing facility must be able to be reproduced accurately anywhere in the world. The book integrates knowledge from basic sciences and engineering disciplines, compiled by experts from internationally known metrology and testing institutions, and academe, as well as from industry, and conformity-assessment and accreditation bodies. The Commission of the European Union has expressed this as there is no science without measurements, no quality without testing, and no global markets without standards.

Springer Handbook Of Metrology And Testing

Author : Horst Czichos
ISBN : 3642166415
Genre : Technology & Engineering
File Size : 80. 92 MB
Format : PDF, ePub, Mobi
Download : 303
Read : 603

Get This Book


This Springer Handbook of Metrology and Testing presents the principles of Metrology – the science of measurement – and the methods and techniques of Testing – determining the characteristics of a given product – as they apply to chemical and microstructural analysis, and to the measurement and testing of materials properties and performance, including modelling and simulation. The principal motivation for this Handbook stems from the increasing demands of technology for measurement results that can be used globally. Measurements within a local laboratory or manufacturing facility must be able to be reproduced accurately anywhere in the world. The book integrates knowledge from basic sciences and engineering disciplines, compiled by experts from internationally known metrology and testing institutions, and academe, as well as from industry, and conformity-assessment and accreditation bodies. The Commission of the European Union has expressed this as there is no science without measurements, no quality without testing, and no global markets without standards.

Advanced Mathematical And Computational Tools In Metrology And Testing Viii

Author : Franco Pavese
ISBN : 9789812839527
Genre : Technology & Engineering
File Size : 75. 92 MB
Format : PDF, Docs
Download : 404
Read : 655

Get This Book


The main theme of the AMCTM 2008 conference, reinforced by the establishment of IMEKO TC21, was to provide a central opportunity for the metrology and testing community worldwide to engage with applied mathematicians, statisticians and software engineers working in the relevant fields. This review volume consists of reviewed papers prepared on the basis of the oral and poster presentations of the Conference participants. It covers all the general matters of advanced statistical modeling (e.g. uncertainty evaluation, experimental design, optimization, data analysis and applications, multiple measurands, correlation, etc.), metrology software (e.g. engineering aspects, requirements or specification, risk assessment, software development, software examination, software tools for data analysis, visualization, experiment control, best practice, standards, etc.), numerical methods (e.g. numerical data analysis, numerical simulations, inverse problems, uncertainty evaluation of numerical algorithms, applications, etc.), and data fusion techniques and design and analysis of inter-laboratory comparisons.

Publications Of The National Institute Of Standards And Technology Catalog

Author : National Institute of Standards and Technology (U.S.)
ISBN : UIUC:30112101978663
Genre : Reference
File Size : 81. 45 MB
Format : PDF, Kindle
Download : 368
Read : 371

Get This Book



Advanced Mathematical And Computational Tools In Metrology And Testing Ix

Author : Franco Pavese
ISBN : 9789814397940
Genre : Mathematics
File Size : 54. 89 MB
Format : PDF, ePub
Download : 764
Read : 254

Get This Book


This volume contains original, refereed worldwide contributions. They were prompted by presentations made at the ninth AMCTM Conference held in G teborg (Sweden) in June 2011 on the theme of advanced mathematical and computational tools in metrology and also, in the title of this book series, in testing. The themes in this volume reflect the importance of the mathematical, statistical and numerical tools and techniques in metrology and testing and, also in keeping the challenge promoted by the Metre Convention, to access a mutual recognition for the measurement standards.

Top Download:

Best Books